إرسال موضوع جديد الرد على الموضوع  [ مشاركة واحده ] 
الكاتب رسالة
 عنوان المشاركة: جاكت كروشيه حريمى بغرزة مخرمة وكشكشة من الاطراف بالباترون
مرسل: الثلاثاء مارس 26, 2013 6:08 pm 
غير متصل
مراقب عام
مراقب عام
اشترك في: الاثنين إبريل 05, 2010 7:23 pm
مشاركات: 13047
مكان: المنصورة

جاكت كروشيه حريمى بغرزة مخرمة وكشكشة من الاطراف بالباترون



جاكت-كروشيه-حريمى-بغرزة مخرمة-وكشكشه من الطراف-بالباترون-جواكت كروشيه بالباترون-جاكت كروشيه انيق للعمل-باترونات ملابس كروشيه حريمى

بسم الله الرحمن الرحيم

جاكت كروشيه حريمى بغرزة مخرمة وكشكشة من الاطراف بالباترون

Crochet jacket with lace pattern and flounce at the bottom

صورة


Size: S - M - L - XL - XXL - XXXL

Materials: 450-500-550-600-650-700 g colour no 12, peach

CROCHET HOOK SIZE 3 mm – or size needed to get 23 tr x 12 rows = 10 x 10 cm. When working pattern 1 repetition (= A.1 b) = approx. 3,5 cm in width x 4 cm vertically (= 4 rows).

BUTTONS: 6 pieces

CROCHET INFO:
Replace first tr on every row with 3 ch.

PATTERN:
See diagram A.1.

DECREASE TIP:
Dec at beg of row as follows: Work sl sts over no of tr to be dec.
Dec at end of row as follows: When no of tr to be dec remains, turn.
--------------------------------------------------------

JACKET:
Worked bottom up, back and forth from mid front. READ CROCHET INFO!
Work 246-265-284-313-342-380 ch on hook size 3 mm with Safran. Continue with 1 dc in 2nd ch from hook, then 1 dc in each of the next 4-5-6-5-4-6 ch, * skip 1 ch, 1 dc in each of the next 5 ch *, repeat from *-* the entire row = 205-221-237-261-285-317 dc. Continue diagram A.1 as follows: 3 ch up from first dc, 1 tr in next dc, diagram a over the first 9 dc, diagram b until 10 dc remain, diagram c over the first 8 dc, then 1 tr in each of the last 2 dc (= 25-27-29-32-35-39 repetitions on row). Repeat the 4 rows in A.1 upwards until piece measures approx. 32-32-32-36-36-36 cm – finish after 4th row in diagram.
REMEMBER THE CROCHET TENSION!
On next row work tr as shown in 5th row in diagram, i.e. as follows: 1 tr in each of the first 4 tr, * 2 tr in ch-loop, 2 tr in next ch-loop, 1 tr in each of the next 4 tr *, repeat from *-*, finish with 2 tr in each of the last 2 ch-loops and 1 tr in each of the last 4 tr = 204-220-236-260-284-316 tr.
Then finish front and back piece separately.

FIRST FRONT PIECE:
Work tr back and forth over the first 50-53-57-62-68-75 tr on row. At the same time dec towards the armhole on every row: 2 tr 0-0-1-2-3-5 times and 1 tr 1-2-2-3-5-6 times – SEE DECREASE TIP = 49-51-53-55-57-59 tr remain. When piece measures 42-43-44-47-48-49 cm, beg neck dec as follows: Dec 13-13-14-14-15-15 tr 1 time, 3 tr 1 time, 2 tr 2 times and 1 tr 3 times = 26-28-29-31-32-34 tr remain on row. Cut the thread when piece measures approx. 52-53-54-59-60-61 cm.

OTHER FRONT PIECE:
Work as first front piece but reversed.

BACK PIECE:
Work tr back and forth over the middle 94-100-108-118-130-144 tr (do not work over the 5-7-7-9-9-11 sts in each side = armhole). AT THE SAME TIME dec towards armhole in each side as on front piece = 92-96-100-104-108-112 tr. When piece measures 50-51-52-57-58-59 cm, work 1 row only over the outermost 28-30-31-33-34-36 tr in one side for shoulder, then work 1 more row while at the same time dec 2 tr towards the neck, work the rest of row = 26-28-29-31-32-34 tr on shoulder, cut the thread. Piece measures approx. 52-53-54-59-60-61 cm.
Work the same way on the other shoulder.

FLOUNCE AT THE BOTTOM OF BODY:
Work in the dc row at the bottom of body as follows - beg from WS:
ROW 1: 1 dc in first dc, * 3 ch, skip 1 dc, 1 dc in next dc *, repeat from *-* the entire row.
ROW 2: Turn with 5 ch, 1 dc in first ch-loop, * 4 ch, 1 dc in next ch-loop *, repeat from *-* the entire row.
ROW 3: Turn with 6 ch, 1 dc in first ch-loop, * 6 ch, 1 dc in next ch-loop *, repeat from *-* the entire row.
ROW 4: Work as follows in every ch-loop: 2 dc + 1 picot (= 3 ch, 1 dc in first ch) + 2 dc. Cut and fasten the thread.

SLEEVE:
Worked back and forth and sewn tog at the end.
Work 68-68-78-78-78-87 ch on hook size 3 mm with Safran. Turn and work 1 dc in 2nd ch from hook, then work 1 dc in each of the next 6-6-4-4-4-7 ch, * skip 1 ch, 1 dc in each of the next 5 ch *, repeat from *-* the entire row = 57-57-65-65-65-73 dc.
Continue to work diagram A.1 as follows: Diagram a over the first 9 dc, diagram b until 8 dc remain, then diagram c (= 7-7-8-8-8-9 repetitions on row). Continue like this until the 4 rows in diagram A.1 have been worked a total of 3 times vertically. Piece measures approx. 12 cm. On next row work tr as shown in 5th row in diagram, i.e. as follows: 1 tr in each of the first 2 tr, * 2 tr in ch-loop, 2 tr in next ch-loop, 1 tr in each of the next 4 tr *, repeat from *-*, finish with 2 tr in each of the last 2 ch-loops and 1 tr in each of the last 2 tr = 56-56-64-64-64-72 tr. Continue with 1 tr in every tr – AT THE SAME TIME when piece measures 16 cm, inc 1 tr in each side by working 2 tr in next to last tr in each side. Repeat inc 9-12-11-13-16-15 more times: SIZE S: Every 4th row, SIZE M + L: Every 3rd row, SIZE XL: Alternately every other and 3rd row, SIZE XXL + XXXL: Every other row = 76-82-88-92-98-104 tr.
When piece measures 49-48-47-46-45-44 cm (shorter measurements in the larger sizes because of longer sleeve cap and broader shoulder width), dec for sleeve cap on every row in each side as follows: 3 tr 1 time, 2 tr 5-6-8-9-10-11 times and 3 tr 1 time. Piece now measures approx. 55 cm for all sizes, cut the thread.

EDGE AT THE BOTTOM OF SLEEVE:
Work in the dc row at the bottom of sleeve as follows - beg from WS:
ROW 1: 1 dc in first dc, * 5 ch, skip 2 dc, 1 dc in next dc *, repeat from *-* the entire row - NOTE: For the no of sts to add up skip only 1 dc the last time in sizes S and M. In sizes L and XL skip 3 dc the last time.
Turn piece.
ROW 2: Work as follows in every ch-loop: 2 dc + 1 picot (= 3 ch, 1 dc in first ch) + 2 dc. Cut and fasten the thread.

ASSEMBLY:
Sew shoulder seams and sleeve seams edge to edge to avoid a chunky seam and sew sleeves in body.
Work up along right band, around the neck and down along left band as follows: 1 dc in first st, * 3 ch, skip approx. 1 cm, 1 dc in next st *, repeat from *-*.
Sew buttons on left band – top button should be approx. 1 cm from the top, then evenly spaced downwards. Button in ch-loops on right band.

صورة

صورة

صورة






دورة تعلم الكروشيه من البداية وحتى الإحتراف

صورة



أعلى
رد مع اقتباس


إرسال موضوع جديد الرد على الموضوع  [ مشاركة واحده ] 

أقرا ايضا
باترون بونشو كروشيه حريمى بغرزة مخرمة بالباترون
جاكت كروشيه حريمى بغرزة الزجزاج بالباترون
بوليرو كروشيه صيفى بالباترون بغرزة مخرمة روعه
جاكت كروشيه حريمى بالباترون إلبسيه وإنتى رايحه الشغل
جاكت كروشية بالباترون بغرزة الفيشارة
جاكت كروشيه بالباترون
جاكت كروشيه للسيدات بالباترون سهل وأنيق
جاكت كروشيه بوحدات جرانى مربعة بالباترون للسيدات الأنيقات
شال كروشيه مثلث بغرزة روعه بالباترون
تونيك كروشيه بغرزة جميلة وحواف مكشكشة بالباترون

تعليمات المشاركة
لا تستطيع كتابة مواضيع جديدة في هذا المنتدى
لا تستطيع كتابة ردود في هذا المنتدى
لا تستطيع تعديل مشاركاتك في هذا المنتدى
لا تستطيع حذف مشاركاتك في هذا المنتدى
لا تستطيع إرفاق ملف في هذا المنتدى
لهلوبه - أعلى

cron
Powered by phpBB® Forum Software © phpBB Group
ترجم بواسطة phpBBArabia
phpbb_seo