إرسال موضوع جديد الرد على الموضوع  [ مشاركة واحده ] 
الكاتب رسالة
 عنوان المشاركة: باترون بونشو كروشيه بالباترون للبنات شيك جدا
مرسل: الثلاثاء مارس 26, 2013 6:03 pm 
غير متصل
مراقب عام
مراقب عام
اشترك في: الاثنين إبريل 05, 2010 7:23 pm
مشاركات: 13047
مكان: المنصورة

باترون بونشو كروشيه بالباترون للبنات شيك جدا



باترون-بونشو-كروشيه-للبنات-قصير-بغرزة مخرمة-بونشوهات كروشيه بالباترون لبنات الجامعه

بسم الله الرحمن الرحيم

باترون بونشو كروشيه بالباترون للبنات شيك جدا

Crochet poncho

صورة

Size: S - M - L - XL - XXL - XXXL

Materials:Colour no 78, silver green:
250-300-300-350-350-400 g

CROCHET HOOK SIZE 4.5 mm - or size needed to get 18 tr x 8 rows = 10 x 10 cm (1 repetition of diagram A.1 = width approx. 7.5 cm and 6 cm vertically, 1 repetition of diagram A.2 = width approx. 9.5 cm and 4 cm vertically).

PATTERN:
See diagrams A.1 to A.3 and read explanation below.

INCREASE TIP 1 (applies ROW 2):
Inc 1 tr by working 2 tr in same dc.

INCREASE TIP 2:
All inc are done on rows/rounds with only tr (i.e. not on rows/rounds with holes). Inc 1 tr by working 1 tr in next tr, 2 tr in next ch-loop.

PATTERN A.1:
ROUND 1: 1 ch, 1 dc in 3rd ch from previous round, * 3 ch, skip 2 tr, 1 dc in next tr *, repeat from *-*, finish with 3 ch and 1 sl st in 1st dc from beg of round = 56-60-64-68-72-76 ch-loops. Sl sts until 1st ch-loop.
ROUND 2: Work 1 ch, 1 dc in same loop, ** 7 tr in next ch-loop, * 1 dc in next ch-loop, 3 ch *, repeat from *-* 1 more time, 1 dc in next ch-loop **, repeat from **-** the entire round (14-15-16-17-18-19 times in total) - but when repeating the last time, repeat *-* 2 times, then finish round with 1 sl st in 1st dc from beg of round. Sl sts until 1st tr.
ROUND 3: * Work 1 tr in each of the next 7 tr with 1 ch between every tr (NOTE: Replace 1st tr on round with 3 ch) = 7 tr and 6 ch-loops, 1 dc in next ch-loop, 3 ch, 1 dc in next ch-loop *, repeat from *-* the entire round, finish with 1 sl st in 3rd ch from beg of round. Sl sts until 1st ch-loop.
ROUND 4: Work 1 PICOT - read explanation below - in every ch-loop the entire round (= 7 picots over every repetition), finish with 1 sl st in 1st dc from beg of round. Sl sts until ch-loop on 1st picot.
ROUND 5: ** In ch-loop on each of the next 6 picots work * 1 tr in ch-loop, 1 ch *, repeat from *-* 2 times in ch-loop on next picot ** = 8 tr and 8 ch-loops over every repetition, repeat from **-** the entire round, finish with 1 sl st in 3rd ch from beg of round.
ROUND 6 (not shown in diagram): 3 ch (counted as 1st tr), 1 tr in 1st ch-loop, work 2 tr in every ch-loop the entire round = 16 tr over every repetition, finish with 1 sl st in 3rd ch from beg of round = 224-240-256-272-288-304 tr. Do not cut the thread.

PICOT:
1 picot = 1 dc, 3 ch, 1 dc in same ch-loop/dc.

PATTERN A.2:
ROUND 1: 1 ch, 1 dc in 3rd ch from previous round, * 4 ch, skip 3 tr, 1 dc in next tr *, repeat from *-*, finish with 4 ch and 1 sl st in 1st dc from beg of round = 56-60-64-68-72-76 ch-loops. Sl sts until 1st ch-loop.
ROUND 2: Work 1 ch, 1 dc in same loop, ** 7 tr in next ch-loop, * 1 dc in next ch-loop, 5 ch *, repeat from *-* 1 more time, 1 dc in next ch-loop **, repeat from **-** the entire round (15 times in total) - but when repeating the last time, repeat *-* 2 times, then finish round with 1 sl st in 1st dc from beg of round. Sl sts until 1st tr.
ROUND 3: Work 1 tr in each of the next 7 tr with 1 ch between every tr = 7 tr and 6 ch-loops, 1 dc in next ch-loop, 5 ch, 1 dc in next ch-loop *, repeat from *-* the entire round, finish with 1 sl st in 3rd ch from beg of round. Sl sts until 1st ch-loop.
ROUND 4: Work 1 picot in every ch-loop the entire round and finish with 1 sl st in 1st dc from beg of round.

PATTERN A.3 (neck edge):
ROW 1: 1 ch, 1 dc in 1st dc, * 3 ch, skip 2 dc, 1 dc in next dc *, repeat from *-* until 2 dc remain, finish with 3 ch and 1 dc in last dc = 32-34-36-38-40-42 dc and 31-33-35-37-39-41 ch-loops, turn.
ROW 2: Sl sts until 1st ch-loop, 1 ch, 1 dc in same loop, * in next ch-loop work 3 bobbles - read explanation below - with 2 ch between every bobble, 1 dc in next ch-loop *, repeat from *-* the entire row (finish with 1 dc in last ch-loop), turn.
ROW 3: Work 1 picot in every ch-loop and 1 picot in every dc.

BOBBLE:
1 bobble = work 2 tr in same ch-loop - but wait with last pull through on both sts, pull thread through all 3 sts on hook.
----------------------------------------------------------

PONCHO:
Worked from neck and down with vent mid back. The piece is first worked back and forth and then in the round.
ROW 1: With Muskat and hook size 4.5 mm, work 95-101-107-113-119-125 ch, turn and work 1 dc in 2nd ch from hook, then 1 dc in every ch = 94-100-106-112-118-124 dc (divisible by 3 + 1 dc), turn.
ROW 2: Work 3 ch (counted as 1st tr), then work tr in every dc - AT THE SAME TIME inc 31-31-31-33-33-33 tr - READ INCREASE TIP 1 - evenly on row = 125-131-137-145-151-157 tr, turn.
ROW 3 (with holes): 4 ch (counted as 1st tr + 1 ch), * skip 1 tr, 1 tr in next tr, 1 ch *, repeat from *-*, finish with 1 tr in 3rd ch from beg of previous row = 63-66-69-73-76-79 tr with 1 ch between every tr, turn.
ROW 4 (with tr): Work 3 ch (counted as 1st tr), 1 tr in 1st ch-loop, work 2 tr in every ch-loop on row - AT THE SAME TIME inc 16-16-16-18-18-18 tr - READ INCREASE TIP 2 - evenly on row, NOTE! Work 1 tr in last ch-loop on row, finish with 1 tr in 3rd ch from beg of previous row = 141-147-153-163-169-175 tr, turn.
ROW 5: Work as ROW 3 = 71-74-77-82-85-88 tr with 1 ch between every tr, turn.
ROW 6: 3 ch, 1 tr in 1st ch-loop, work 2 tr in every ch-loop on row - AT THE SAME TIME inc 3-5-7-5-7-9 tr evenly on row, finish with 1 tr in 3rd ch from beg of previous row = 144-152-160-168-176-184 tr. REMEMBER THE CROCHET TENSION! Continue to work in the round as follows:
ROUND 1 (with holes): 4 ch (counted as 1st tr + 1 ch), * skip 1 tr, 1 tr in next tr, 1 ch *, repeat from *-*, finish with 1 sl st in 3rd ch from beg of round = 72-76-80-84-88-92 tr with 1 ch between every tr.
ROUND 2 (with tr): 3 ch (counted as 1st tr), 1 tr in 1st ch-loop, work 2 tr in every ch-loop the entire round - AT THE SAME TIME inc 4 tr evenly on round, finish with 1 sl st in 3rd ch from beg of round = 148-156-164-172-180-188 tr.
Repeat 1st and 2nd ROUND 5-6-7-8-9-10 more times (i.e. inc with 4 tr evenly every other round a total of 6-7-8-9-10-11 times) = 168-180-192-204-216-228 tr on round. Then work 1st and 2nd ROUND alternately WITHOUT inc until piece measures approx. 26-29-31-34-36-39 cm (finish with 1 round with only tr = ROUND 2).
Then work diagram A.1 - see diagram and explanation above. When A.1 has been worked 1 time vertically, there are 224-240-256-272-288-304 tr on round. Then work diagram A.2 - see diagram and read explanation above - 1 time vertically, cut and fasten the thread.

NECK EDGE:
Worked back and forth. Work from RS diagram A.3 - see diagram and read explanation above - around the entire neck edge (start mid back), do not cut the thread. Then work ch for 24 cm, turn and work sl sts in every ch on return = 1 tie, cut and fasten the thread. Work another tie the same way in the corner on the other side of vent.


صورة

صورة

صورة






دورة تعلم الكروشيه من البداية وحتى الإحتراف

صورة



أعلى
رد مع اقتباس


إرسال موضوع جديد الرد على الموضوع  [ مشاركة واحده ] 

أقرا ايضا
باترون بونشو كروشيه حريمى بغرزة مخرمة بالباترون
بونشو كروشيه حريمى بالباترون
بونشو كروشيه للبنوتات بالباترون
بونشو كروشيه حريمى للربيع والصيف بالباترون
بونشو كروشيه بوحدة مربعه غاية فى الروعه بالباترون والشرح بالعربى
بلوفر بونشو كروشيه بغرزة لاسيه للسيدات بالباترون والشرح بالعربى مع الصور
باترون شال كروشيه مثلث للبنات
سليبر كروشيه بورود كروشيه للبنات بالباترون
باترون سليبر كروشيه للبنات بسيط ورقيق قوى
كاب كروشيه للبنات بالباترون للحماية من الشمس

تعليمات المشاركة
لا تستطيع كتابة مواضيع جديدة في هذا المنتدى
لا تستطيع كتابة ردود في هذا المنتدى
لا تستطيع تعديل مشاركاتك في هذا المنتدى
لا تستطيع حذف مشاركاتك في هذا المنتدى
لا تستطيع إرفاق ملف في هذا المنتدى
لهلوبه - أعلى

Powered by phpBB® Forum Software © phpBB Group
ترجم بواسطة phpBBArabia
phpbb_seo